12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849 |
- /*!
- \file readme.txt
- \brief USART synchronous
- \version 2017-02-10, V1.0.0, firmware for GD32F30x
- \version 2018-10-10, V1.1.0, firmware for GD32F30x
- \version 2018-12-25, V2.0.0, firmware for GD32F30x
- \version 2020-09-30, V2.1.0, firmware for GD32F30x
- */
- /*
- Copyright (c) 2020, GigaDevice Semiconductor Inc.
- Redistribution and use in source and binary forms, with or without modification,
- are permitted provided that the following conditions are met:
- 1. Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright notice,
- this list of conditions and the following disclaimer in the documentation
- and/or other materials provided with the distribution.
- 3. Neither the name of the copyright holder nor the names of its contributors
- may be used to endorse or promote products derived from this software without
- specific prior written permission.
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
- INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
- OF SUCH DAMAGE.
- */
- This demo is based on the GD32307C-EVAL-V1.1, it provides a basic
- communication between USART0 (Synchronous mode) and SPI0. First, USART0
- transmits a series of data to SPI0, then SPI0 transmits a series of data
- to USART0. Compare the transmitted data and the received data. If the
- data transmitted from USART0 and received by SPI0 are the same, LED2 and
- LED4 will be on, otherwise off. If the data transmitted from SPI0 and
- received by USART0 are the same, LED3 and LED5 will be on, otherwise off.
-
- connect SPI0 SCK pin(PA5) TO USART0_CK pin(PA8)
- connect SPI0 MISO pin(PA6) TO USART0_RX pin(PA10)
- connect SPI0 MOSI pin(PA7) TO USART0_TX pin(PA9)
|