123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384 |
- /*!
- \file main.c
- \brief standby wakeup through wakeup pin
- \version 2017-02-10, V1.0.0, firmware for GD32F30x
- \version 2018-10-10, V1.1.0, firmware for GD32F30x
- \version 2018-12-25, V2.0.0, firmware for GD32F30x
- \version 2020-09-30, V2.1.0, firmware for GD32F30x
- */
- /*
- Copyright (c) 2020, GigaDevice Semiconductor Inc.
- Redistribution and use in source and binary forms, with or without modification,
- are permitted provided that the following conditions are met:
- 1. Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright notice,
- this list of conditions and the following disclaimer in the documentation
- and/or other materials provided with the distribution.
- 3. Neither the name of the copyright holder nor the names of its contributors
- may be used to endorse or promote products derived from this software without
- specific prior written permission.
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
- INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
- OF SUCH DAMAGE.
- */
- #include "gd32f30x.h"
- #include <stdio.h>
- #include "gd32f307c_eval.h"
- void led_config(void);
- /*!
- \brief main function
- \param[in] none
- \param[out] none
- \retval none
- */
- int main(void)
- {
- /* enable clock */
- rcu_periph_clock_enable(RCU_PMU);
- /* LED configuration and turn on all LEDs */
- led_config();
- gd_eval_led_on(LED2);
- gd_eval_led_on(LED4);
- gd_eval_led_on(LED3);
- gd_eval_led_on(LED5);
- /* tamper key configuration */
- gd_eval_key_init(KEY_TAMPER, KEY_MODE_GPIO);
- /* enable wakeup pin */
- pmu_wakeup_pin_enable();
- /* press tamper key to enter standby mode and use wakeup key to wakeup mcu */
- while(1) {
- if(RESET == gpio_input_bit_get(TAMPER_KEY_GPIO_PORT, TAMPER_KEY_PIN)) {
- pmu_to_standbymode();
- }
- }
- }
- /*!
- \brief configure LED
- \param[in] none
- \param[out] none
- \retval none
- */
- void led_config(void)
- {
- gd_eval_led_init(LED2);
- gd_eval_led_init(LED3);
- gd_eval_led_init(LED4);
- gd_eval_led_init(LED5);
- }
|