caowencai
46500e86d7
LCD_relay_init
|
há 7 meses atrás | |
|---|---|---|
| .. | ||
| gd32f30x_enet_eval.c | há 7 meses atrás | |
| gd32f30x_it.c | há 7 meses atrás | |
| hello_gigadevice.c | há 7 meses atrás | |
| main.c | há 7 meses atrás | |
| netconf.c | há 7 meses atrás | |
| readme.txt | há 7 meses atrás | |
readme.txt
/*!
\file readme.txt
\brief description of the enet demo
\version 2017-02-10, V1.0.0, firmware for GD32F30x
\version 2018-10-10, V1.1.0, firmware for GD32F30x
\version 2018-12-25, V2.0.0, firmware for GD32F30x
\version 2020-09-30, V2.1.0, firmware for GD32F30x
*/
/*
Copyright (c) 2020, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/
This demo is based on the GD32307C-EVAL-V1.1 board, it shows how to configure the
enet peripherals to send and receive frames in normal mode and use lwip tcp/ip
stack to realize ping, telnet and tcp server functions.
JP4, JP13, JP18, JP19 must be fitted.
It is configured in RMII mode, and 25MHz oscillator should be used, the system clock
is configured to 108MHz. Users should configure ip address, net mask and gateway address
of GD32307C-EVAL board according to the actual net situation from the private defines in main.h.
This demo realize Telnet application, the eval board acts as tcp server. Users can link
the client with the eval board server, using 23 port. Users can see the reply from the
server, and can send the name(should input enter key) to server.
By default, the packet reception is polled in while(1). If users want to receive packet in
interrupt service, uncomment the macro define USE_ENET_INTERRUPT in main.h.
If users need dhcp function, it can be configured from the private defines in lwipopts.h and main.h.
This function is closed in default.
\file readme.txt
\brief description of the enet demo
\version 2017-02-10, V1.0.0, firmware for GD32F30x
\version 2018-10-10, V1.1.0, firmware for GD32F30x
\version 2018-12-25, V2.0.0, firmware for GD32F30x
\version 2020-09-30, V2.1.0, firmware for GD32F30x
*/
/*
Copyright (c) 2020, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/
This demo is based on the GD32307C-EVAL-V1.1 board, it shows how to configure the
enet peripherals to send and receive frames in normal mode and use lwip tcp/ip
stack to realize ping, telnet and tcp server functions.
JP4, JP13, JP18, JP19 must be fitted.
It is configured in RMII mode, and 25MHz oscillator should be used, the system clock
is configured to 108MHz. Users should configure ip address, net mask and gateway address
of GD32307C-EVAL board according to the actual net situation from the private defines in main.h.
This demo realize Telnet application, the eval board acts as tcp server. Users can link
the client with the eval board server, using 23 port. Users can see the reply from the
server, and can send the name(should input enter key) to server.
By default, the packet reception is polled in while(1). If users want to receive packet in
interrupt service, uncomment the macro define USE_ENET_INTERRUPT in main.h.
If users need dhcp function, it can be configured from the private defines in lwipopts.h and main.h.
This function is closed in default.