wenkong_junshi/Examples/CAN/communication_among_CANs/readme.txt

/*!
    \file    readme.txt
    \brief   description of the communication_among_CANS demo
    
    \version 2017-02-10, V1.0.0, firmware for GD32F30x
    \version 2018-10-10, V1.1.0, firmware for GD32F30x
    \version 2018-12-25, V2.0.0, firmware for GD32F30x
    \version 2020-09-30, V2.1.0, firmware for GD32F30x
*/

/*
    Copyright (c) 2020, GigaDevice Semiconductor Inc.

    Redistribution and use in source and binary forms, with or without modification, 
are permitted provided that the following conditions are met:

    1. Redistributions of source code must retain the above copyright notice, this 
       list of conditions and the following disclaimer.
    2. Redistributions in binary form must reproduce the above copyright notice, 
       this list of conditions and the following disclaimer in the documentation 
       and/or other materials provided with the distribution.
    3. Neither the name of the copyright holder nor the names of its contributors 
       may be used to endorse or promote products derived from this software without 
       specific prior written permission.

    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, 
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
OF SUCH DAMAGE.
*/

  This demo is based on the GD32307C-EVAL-V1.1 board, it shows how to configure the 
CAN0 and CAN1 peripherals to send and receive CAN frames in normal mode. Pressing 
Wakeup key or Tamper key:

  When Tamper key is pressed, CAN0 sends a message to CAN1 and print it.when CAN1 
receives correctly this message,the receive data will be printed by COM0 and LED5 
toggles one time. 

  When Wakeup key is pressed, CAN1 sends a message to CAN0 and print it. When CAN0 
receives correctly this message,the receive data will be printed by COM0 and LED4 toggles 
one time.

  User can select one from the preconfigured CAN baud rates from the private 
defines in main.c. These baudrates is correct only when the system clock frequency 
is 120M.

  P2,P3 and P4 must be fitted.
  Connect JP14 CAN_L to JP15 CAN_L
  Connect JP14 CAN_H to JP15 CAN_H