#include "MB_RTU_task.h"
#include "All_define.h"
#include "modbus.h"
#include <SIM_EEPROM.h>
#include "key_operate.h"
#include "protocol.h"
static uint8_t Reset_CNT = 0;
void eMBFuncReadHoldingRegister(UART_msg *ptrmsg)
{
	UART_msg msg;
	u8 ii= 0;
	u8 i =0;
	u8 num = ptrmsg->data[5];
	msg.len = 5 + num;
	msg.data[ii++] = ptrmsg->data[0];
	msg.data[ii++] = 3;
	msg.data[ii++] = 2 * num;
	for(i = 0;i < num;i++)
	{
		  switch(ptrmsg->data[3]) {
			case 1: 
				{
					msg.data[ii++] = 0;
					uint8_t relay = 0;
					if((dis_page_param.face_plate_param.Air_condition_Relay & 0x01) != 0 \
					  ||(dis_page_param.face_plate_param.Air_condition_Relay & 0x02) == 0)
					{
						if(struct_realy.relay_ck == 1)
						{
							relay = 1;							
						}
						else
						{
							relay = 0;							
						}					
					}
					else if((dis_page_param.face_plate_param.Air_condition_Relay & 0x03) != 0 )
					{
						if(struct_realy.relay_hk == 1)
						{
							relay = 1;							
						}
						else
						{
							relay = 0;							
						}	
					}
					msg.data[ii++] = (dis_page_param.face_plate_param.Air_condition_switch & 0x0f) +\
									 ( (relay <<4) & 0xf0 ) ;
				}
			  break;
			case 2:
				msg.data[ii++] = 0;
				msg.data[ii++] = dis_page_param.face_plate_param.Air_condition_mode;	
			  break;
			case 3:	
				{
					uint8_t	speed = 0;
					uint8_t low = 0;
					uint8_t hight = 0;
					if(struct_realy.speed_type.fs1 == 1)
					{
						speed = 1;
					}
					else if(struct_realy.speed_type.fs2 == 1)
					{
						speed = 1;
					}
					else if(struct_realy.speed_type.fs3 == 1)
					{
						speed = 1;
					}
					else 
					{
						speed = 0;
					}
					hight = (u8)(dis_page_param.face_plate_param.Air_wind_speed >>8);
					low = (u8) ( ( (dis_page_param.face_plate_param.Air_wind_speed >>0) &0x0f) + \
											  ((speed << 4) &0xf0 ) );
					if( ( dis_page_param.face_plate_param.Air_wind_speed &0x0100 )!= 0)
					{
						if(speed == 0)	
						{
							low = 0x00;
						}
						else if (speed == 1) 
						{
							low = 0x10;
						}
					}
					msg.data[ii++] = hight;
					msg.data[ii++] = low;					
				}
			  break;
			case 4: 
				msg.data[ii++] = 0;
				msg.data[ii++] = dis_page_param.face_plate_param.Air_set_temp;	
			  break;
			case 5: 
				msg.data[ii++] = (u8)(dis_page_param.face_plate_param.Air_relay_switch >>8);
				msg.data[ii++] = (u8)(dis_page_param.face_plate_param.Air_relay_switch >>0);	
			  break;			
			case 6: 
				{
					uint8_t relay = 0;
					if((dis_page_param.face_plate_param.Floor_heating_Relay & 0x01) != 0 )
					{
						if(struct_realy.relay_hk == 1)
						{
							relay = 1;							
						}
						else
						{
							relay = 0;							
						}					
					}
					else if((dis_page_param.face_plate_param.Floor_heating_Relay & 0x02) != 0 )
					{
						if(struct_realy.relay_ck == 1)
						{
							relay = 1;							
						}
						else
						{
							relay = 0;							
						}	
					}					
					msg.data[ii++] = 0;
					msg.data[ii++] = (dis_page_param.face_plate_param.Floor_heating_switch & 0x0f) +\
									 ( (relay <<4) & 0xf0 ) ;
				}
			  break;			
			case 7: 
				msg.data[ii++] = 0;
				msg.data[ii++] = dis_page_param.face_plate_param.Floor_heating_set_temp;	
			  break;			
			case 8: 
				msg.data[ii++] = (u8)(dis_page_param.face_plate_param.Floor_relay_switch >>8);
				msg.data[ii++] = (u8) (dis_page_param.face_plate_param.Floor_relay_switch >>0);	
			  break;				
			case 9: 
				msg.data[ii++] = 0;
				msg.data[ii++] = dis_page_param.face_plate_param.Fresh_air_switch;
			  break;				
			case 11: 
				{
					uint8_t	speed = 0;
					if(dis_page_param.face_plate_param.Fresh_air_Relay == 0x0001)
					{
						if(struct_realy.speed_type.fs1 == 1)
						{
							speed = 1;
						}
						else if(struct_realy.speed_type.fs2 == 1)
						{
							speed = 1;
						}
						else if(struct_realy.speed_type.fs3 == 1)
						{
							speed = 1;
						}
						else 
						{
							speed = 0;
						}		
					}					
					msg.data[ii++] = 0;
					msg.data[ii++] = (u8) ( ( (dis_page_param.face_plate_param.Fresh_air_speed >>0) &0x0f) + \
											((speed << 4) &0xf0 ) );	
				}
			  break;					
			case 12:
				msg.data[ii++] = 0;
				msg.data[ii++] = dis_page_param.face_plate_param.Compensates_temp;
			  break;
			case 13:
				msg.data[ii++] = (u8)(dis_page_param.face_plate_param.Real_time_Temp >>8);
				msg.data[ii++] = (u8)(dis_page_param.face_plate_param.Real_time_Temp >>0);
			  break;	
			case 14:
				msg.data[ii++] = 0;
				msg.data[ii++] = dis_page_param.face_plate_param.Real_time_Humi;
			  break;			
			case 16:
				msg.data[ii++] = (u8)(dis_page_param.face_plate_param.Air_condition_Relay >>8);
				msg.data[ii++] = (u8)(dis_page_param.face_plate_param.Air_condition_Relay >>0);
			  break;
			case 17:
				msg.data[ii++] = (u8)(dis_page_param.face_plate_param.Floor_heating_Relay >>8);
				msg.data[ii++] = (u8)(dis_page_param.face_plate_param.Floor_heating_Relay >>0);
			  break;
			case 18:
				msg.data[ii++] =  0;
				msg.data[ii++] = (u8)(dis_page_param.face_plate_param.Fresh_air_Relay >>0);
			  break;	
			case 19:
				msg.data[ii++] =  0;
				msg.data[ii++] = (u8)(dis_page_param.face_plate_param.Ltemp_Protection_valve >>0);
			  break;
			case 20:
				msg.data[ii++] =  0;
				msg.data[ii++] = dis_page_param.face_plate_param.Lock_screen;
			  break;
			case 21:
				msg.data[ii++] =  0;
				msg.data[ii++] = dis_page_param.face_plate_param.Full_Half_Lock;
			  break;
			case 22:
				msg.data[ii++] =  0;
				msg.data[ii++] = dis_page_param.face_plate_param.Data_send;
			  break;			
			case 23:  
				msg.data[ii++] = (u8)(dis_page_param.face_plate_param.Led_Brightness >>8);;
				msg.data[ii++] = (u8)(dis_page_param.face_plate_param.Led_Brightness >>0);
			  break;
			case 25:  
				msg.data[ii++] = 0;
				msg.data[ii++] = dis_page_param.face_plate_param.Sleep_time_addr;
				break;	
			case 26:  
				msg.data[ii++] = 0;
				msg.data[ii++] = dis_page_param.face_plate_param.Code_Version;
				break;				
			case 100:  
				msg.data[ii++] = (uint8_t)((dis_page_param.face_plate_param.Device_BaudRate >> 8) &0xff );
				msg.data[ii++] = (uint8_t)((dis_page_param.face_plate_param.Device_BaudRate >> 0) &0xff );
				break;	
			case 101:  
				msg.data[ii++] = (uint8_t)((dis_page_param.face_plate_param.TempHumi_UpdateMode >> 8) &0xff );
				msg.data[ii++] = (uint8_t)((dis_page_param.face_plate_param.TempHumi_UpdateMode >> 0) &0xff );
				break;	
			case 102:  
				msg.data[ii++] = 0;
				msg.data[ii++] = dis_page_param.face_plate_param.Open_device_mode;
				break;	
			case 109:  
				msg.data[ii++] = 0;
				msg.data[ii++] = dis_page_param.face_plate_param.Parm_SaveFlag;
				break;	
			case 110:  
				msg.data[ii++] = 0;
				msg.data[ii++] = dis_page_param.face_plate_param.Panel_Shield;
				break;	
			case 111:  
				msg.data[ii++] = 0;
				msg.data[ii++] = dis_page_param.face_plate_param.HTemp_Limit;
				break;	
			case 112:  
				msg.data[ii++] = 0;
				msg.data[ii++] = dis_page_param.face_plate_param.LTemp_Limit;
				break;	
			case 0:  
				msg.data[ii++] = 0;
				if(dis_page_param.face_plate_param.Reset_Flag == 1)
				{
					if(Reset_CNT > 0)
					{
						Reset_CNT--;
					}
					else
					{
						dis_page_param.face_plate_param.Reset_Flag = 0;
					}
				}
				msg.data[ii++] = dis_page_param.face_plate_param.Reset_Flag;
				break;	
			default:
				msg.data[ii++] = 0;
				msg.data[ii++] = 0;
			  break;
		  }
		ptrmsg->data[3] += 1;		  
	}
	u16 CRCA;
    u8  CRCH;
    u8  CRCL;
    CRCA = GetCRC16(msg.data,ii);
    CRCH = CRCA>>8;
    CRCL = (u8)CRCA;
	msg.data[ii++] = CRCH;
	msg.data[ii++] = CRCL;
    msg.len = ii;	
	memcpy(ptrmsg,&msg,sizeof(UART_msg));
}
 void PullOutOf_SleepPage(void)
{
	if(dis_page_num.Dis_air_Conditioning == dis_air_Conditioning_sleep)
	{
		dis_page_num.Dis_air_Conditioning = dis_air_Conditioning_open;
	}
	if(dis_page_num.Dis_floor_heating == dis_floor_heating_sleep)
	{
		dis_page_num.Dis_floor_heating = dis_floor_heating_open;
	}	
	if(dis_page_num.Dis_fresh_air == dis_fresh_air_sleep)
	{
		dis_page_num.Dis_fresh_air = dis_fresh_air_open;
	}	
	dis_page_param.advanced_setting_time = 0;
	dis_page_param.sleep_times = 0;	
}
void  Control_Save(uint8_t * Data_need_write)
{
	printf("Parm_Save %d\r\n",Parm_Save);
	if(Parm_Save)
	{
		(*Data_need_write)++;
	}
}
uint8_t AirCondition_Sheiled_Set(void)
{
	if(AirCondition_Sheiled == 0)
	{
		return 1;
	}
	else
	{
		return 0;
	}
}
uint8_t FloorHeating_Sheiled_Set(void)
{
	if(FloorHeating_Sheiled == 0)
	{
		return 1;
	}
	else
	{
		return 0;
	}
}
uint8_t AirFresh_Sheiled_Set(void)
{
	if(AirFresh_Sheiled == 0)
	{
		return 1;
	}
	else
	{
		return 0;
	}
}
uint8_t eMBFuncWriteHoldingRegister_do(uint8_t *data_H,uint8_t *data_L, uint16_t addr,uint8_t *Data_need_write)
{
	uint8_t error_code = 0;
	switch(addr) 
	{			
		case 1: 
			if(AirCondition_Sheiled_Set())
			{
				return 0;
			}
			if(*data_H == 0)
			{
				if(*data_L == 0x01)
				{
					dis_page_param.face_plate_param.Air_condition_switch = 1;
					dis_page_num.display_page = dis_air_Conditioning;
					dis_page_num.Dis_air_Conditioning = dis_air_Conditioning_open;	
					Control_Save(Data_need_write);
				}
				else if (*data_L == 0x00)
				{
					dis_page_param.face_plate_param.Air_condition_switch = 0;
					dis_page_num.display_page = dis_air_Conditioning;
					dis_page_num.Dis_air_Conditioning = dis_air_Conditioning_close;
					Control_Save(Data_need_write);
				}
				else
				{
					error_code += 1;
				}
			}
			else
			{
				error_code += 1;
			}
		  break;
		case 2:
			if(AirCondition_Sheiled_Set())
			{
				return 0;
			}
			if(*data_H == 0)
			{
				if(dis_page_param.face_plate_param.Air_condition_switch == 1)
				{
					if(*data_L == 0 || *data_L == 1 || *data_L == 2 || *data_L == 3)
					{
						dis_page_num.display_page = dis_air_Conditioning;
						dis_page_param.face_plate_param.Air_condition_mode =  *data_L ;	
						Control_Save(Data_need_write);						
					}
					else
					{
						error_code += 1;
					}
				}
				else
				{
					error_code += 1;
				}		
			}
			else
			{
				error_code += 1;		
			}		
		  break;
		case 3:	
			if(AirCondition_Sheiled_Set())
			{
				return 0;
			}
			if(*data_H == 0)
			{
				if(dis_page_param.face_plate_param.Air_condition_switch == 1)
				{
					if(*data_L == 1 || *data_L == 2 || *data_L == 3)
					{
						dis_page_num.display_page = dis_air_Conditioning;
						dis_page_param.face_plate_param.Air_wind_speed = ((uint16_t)*data_H << 8)| ((uint16_t)*data_L <<0);							
						Control_Save(Data_need_write);					
					}
					else
					{
						error_code += 1;
					}	
				}
				else
				{
					error_code += 1;							
				}					
			}
			else if(*data_H == 1)
			{
				if(dis_page_param.face_plate_param.Air_condition_switch == 1)
				{
					if(*data_L == 0)
					{
						dis_page_num.display_page = dis_air_Conditioning;
						dis_page_param.face_plate_param.Air_wind_speed = 0x0100;
						Control_Save(Data_need_write);						
					}
					else
					{
						error_code += 1;
					}	
				}
				else
				{
					error_code += 1;								
				}				
			}
			else
			{
				error_code += 1;
			}				
		  break;
		case 4: 
			if(AirCondition_Sheiled_Set())
			{
				return 0;
			}
			if(*data_H == 0)
			{
				if(dis_page_param.face_plate_param.Air_condition_switch == 1)
				{
					if(*data_L >= Air_set_temp_Down_limit && *data_L <= Air_set_temp_up_limit)
					{
						dis_page_num.display_page = dis_air_Conditioning;
						dis_page_param.face_plate_param.Air_set_temp = *data_L;
						Control_Save(Data_need_write);						
					}
					else
					{
						error_code += 1;				
					}
				}
				else
				{
					error_code += 1;				
				}					
			}
			else
			{
				error_code += 1;						
			}
		  break;
		case 5:	
			{
				if(AirCondition_Sheiled_Set())
				{
					return 0;
				}
				if(dis_page_param.face_plate_param.Air_condition_switch == 1)
				{
					if((dis_page_param.face_plate_param.Air_condition_Relay &0xff00) == 0x0200)
					{
						if((dis_page_param.face_plate_param.Air_condition_Relay &0x00ff) == 0x0001)
						{
							if(*data_H == 0x01)
							{
								if(*data_L == 0x01 || *data_L == 0x00)
								{
									dis_page_param.face_plate_param.Air_relay_switch = ((uint16_t)*data_H) << 8 | ((uint16_t)*data_L) << 0;
									Control_Save(Data_need_write);								
								}
								else
								{
									error_code += 1;									
								}
							}
							else
							{
								error_code += 1;								
							}
						}	
						else if((dis_page_param.face_plate_param.Air_condition_Relay &0x00ff) == 0x0002)
						{
							if(*data_H == 0x02)
							{
								if(*data_L == 0x01 || *data_L == 0x00)
								{
									dis_page_param.face_plate_param.Air_relay_switch = ((uint16_t)*data_H) << 8 | ((uint16_t)*data_L) << 0;
									Control_Save(Data_need_write);								
								}
								else
								{
									error_code += 1;									
								}
							}
							else
							{
								error_code += 1;								
							}						
						}	
						else if((dis_page_param.face_plate_param.Air_condition_Relay &0x00ff) == 0x0003)
						{
							if(*data_H == 0x03)
							{
								if(*data_L == 0x00 || *data_L == 0x01 || *data_L == 0x02 || *data_L == 0x03)
								{
									dis_page_param.face_plate_param.Air_relay_switch = ((uint16_t)*data_H) << 8 | ((uint16_t)*data_L) << 0;
									Control_Save(Data_need_write);								
								}
								else
								{
									error_code += 1;									
								}
							}
							else
							{
								error_code += 1;								
							}													
						}	
						else
						{
							error_code += 1;							
						}					
					}
					else
					{
						error_code += 1;					
					}				
				}
				else
				{
					error_code += 1;						
				}			
			}		
			break;
		case 6: 
			if(FloorHeating_Sheiled_Set())
			{
				return 0;
			}
			if(*data_H == 0)
			{
				if(*data_L == 0x01)
				{
					dis_page_param.face_plate_param.Floor_heating_switch = 1;
					dis_page_num.display_page = dis_floor_heating;
					dis_page_num.Dis_floor_heating = dis_floor_heating_open;
					Control_Save(Data_need_write);
				}
				else if (*data_L == 0x00)
				{
					dis_page_param.face_plate_param.Floor_heating_switch = 0;
					dis_page_num.display_page = dis_floor_heating;
					dis_page_num.Dis_floor_heating = dis_floor_heating_close;
					Control_Save(Data_need_write);					
				}
				else
				{
					error_code += 1;
				}
			}
			else
			{
				error_code += 1;
			}
		  break;			
		case 7: 
			if(FloorHeating_Sheiled_Set())
			{
				return 0;
			}
			if(*data_H == 0)
			{
				if(dis_page_param.face_plate_param.Floor_heating_switch == 1)
				{
					if(*data_L >= Air_set_temp_Down_limit && *data_L <= Air_set_temp_up_limit)
					{
						dis_page_num.display_page = dis_floor_heating;
						dis_page_param.face_plate_param.Floor_heating_set_temp = *data_L;
						Control_Save(Data_need_write);						
					}
					else
					{
						error_code += 1;				
					}
				}	
				else
				{
					error_code += 1;			
				}					
			}
			else
			{
				error_code += 1;						
			}
		  break;
		case 8:		
			{
				if(FloorHeating_Sheiled_Set())
				{
					return 0;
				}
				if(dis_page_param.face_plate_param.Floor_heating_switch == 1)
				{
					if((dis_page_param.face_plate_param.Floor_heating_Relay &0xff00) == 0x0200)
					{
						if((dis_page_param.face_plate_param.Floor_heating_Relay &0x00ff) == 0x0001)
						{
							if(*data_H == 0x01)
							{
								if(*data_L == 0x01 || *data_L == 0x00)
								{
									dis_page_param.face_plate_param.Floor_relay_switch = ((uint16_t)*data_H) << 8 | ((uint16_t)*data_L) << 0;
									Control_Save(Data_need_write);								
								}
								else
								{
									error_code += 1;									
								}
							}
							else
							{
								error_code += 1;								
							}														
						}
						else if((dis_page_param.face_plate_param.Floor_heating_Relay &0x00ff) == 0x0002)
						{
							if(*data_H == 0x02)
							{
								if(*data_L == 0x01 || *data_L == 0x00)
								{
									dis_page_param.face_plate_param.Floor_relay_switch = ((uint16_t)*data_H) << 8 | ((uint16_t)*data_L) << 0;
									Control_Save(Data_need_write);								
								}
								else
								{
									error_code += 1;									
								}
							}
							else
							{
								error_code += 1;								
							}														
						}
						else
						{
							error_code += 1;							
						}							
					}
					else
					{
						error_code += 1;					
					}
				}
				else
				{
					error_code += 1;				
				}					
			}
			break;
		case 9: 
			if(AirFresh_Sheiled_Set())
			{
				return 0;
			}
			if(*data_H == 0)
			{
				if(*data_L == 0x01)
				{
					dis_page_param.face_plate_param.Fresh_air_switch = 1;
					dis_page_num.display_page = dis_fresh_air;
					dis_page_num.Dis_fresh_air = dis_fresh_air_open;
					Control_Save(Data_need_write);					
				}
				else if (*data_L == 0x00)
				{
					dis_page_param.face_plate_param.Fresh_air_switch = 0;
					dis_page_num.display_page = dis_fresh_air;
					dis_page_num.Dis_fresh_air = dis_fresh_air_close;
					Control_Save(Data_need_write);					
				}
				else
				{
					error_code += 1;
				}
			}
			else
			{
				error_code += 1;
			}
		  break;						
		case 11:
			if(AirFresh_Sheiled_Set())
			{
				return 0;
			}
			if(*data_H == 0)
			{
				if(dis_page_param.face_plate_param.Fresh_air_switch == 1)
				{
					if(*data_L == 0x01 || *data_L == 0x02 ||*data_L == 0x03)
					{
						dis_page_param.face_plate_param.Fresh_air_speed = *data_L;
						dis_page_num.display_page = dis_fresh_air;	
						Control_Save(Data_need_write);						
					}
					else
					{
						error_code += 1;						
					}
				}
				else
				{
					error_code += 1;				
				}					
			}
			else
			{			
				error_code += 1;					
			}
			break;
		case 12:
			if(*data_H == 0)
			{
				if((*data_L & 0xf0) == 0xf0)
				{
					if((*data_L & 0x0f) >= 0x07 && (*data_L & 0x0f) <=0x0F)
					{
						*Data_need_write = 1;
						dis_page_param.face_plate_param.Compensates_temp = *data_L;
					}
					else
					{
						error_code += 1;					
					}	
				}
				else if((*data_L & 0xf0) == 0x00)
				{
					if((*data_L & 0x0f) >= 0x00 && (*data_L & 0x0f) <=0x09)
					{
						*Data_need_write = 1;
						dis_page_param.face_plate_param.Compensates_temp =  *data_L ;
					}
					else
					{
						error_code += 1;					
					}						
				}
				else
				{
					error_code += 1;
				}
			}
			else
			{
				error_code += 1;
			}
		  break;
		case 16:
			{
				if(AirCondition_Sheiled_Set())
				{
					return 0;
				}
				if(*data_H == 0)
				{
					if(*data_L == 0)
					{
						*Data_need_write = 1;
						dis_page_param.face_plate_param.Air_condition_Relay = 0x0000;
						dis_page_param.face_plate_param.Air_relay_switch = 0x0000;
					}
					else
					{
						error_code += 1;
					}
				}
				else if(*data_H == 0x01 || *data_H == 0x02)
				{
					if(*data_L == 0x01)
					{
						if(dis_page_param.face_plate_param.Fresh_air_Relay == 0x0000)
						{														
							*Data_need_write = 1;
							dis_page_param.face_plate_param.Air_condition_Relay = ((uint16_t)*data_H) << 8 | ((uint16_t)*data_L) << 0;
							dis_page_param.face_plate_param.Air_relay_switch &= 0xff00;
							dis_page_param.face_plate_param.Air_relay_switch |= ( (*data_L) <<8);
						}
						else
						{
							error_code += 1;
						}
					}
					else if(*data_L == 0x02 || *data_L == 0x03)
					{
						if(dis_page_param.face_plate_param.Fresh_air_Relay == 0x0000 && dis_page_param.face_plate_param.Floor_heating_Relay == 0x0000)
						{														
							*Data_need_write = 1;
							dis_page_param.face_plate_param.Air_condition_Relay = ((uint16_t)*data_H) << 8 | ((uint16_t)*data_L) << 0;
							dis_page_param.face_plate_param.Air_relay_switch &= 0xff00;
							dis_page_param.face_plate_param.Air_relay_switch |= ( (*data_L) <<8);
						}
						else
						{
							error_code += 1;
						}
					}
					else
					{
						error_code += 1;					
					}
				}	
				else
				{
					error_code += 1;
				}					
			}
			break;
		case 17:	
			if(FloorHeating_Sheiled_Set())
			{
				return 0;
			}
			if(*data_H == 0x00)
			{
				if(*data_L == 0)
				{
					*Data_need_write = 1;
					dis_page_param.face_plate_param.Floor_heating_Relay = 0x0000;
					dis_page_param.face_plate_param.Floor_relay_switch = 0x0000;
				}
				else
				{
					error_code += 1;
				}			
			}
			else if(*data_H == 0x02 || *data_H == 0x01)
			{
				if(*data_L == 0x01)
				{
					if(dis_page_param.face_plate_param.Air_condition_Relay == 0x0000 || dis_page_param.face_plate_param.Air_condition_Relay == 0x0101 || \
					dis_page_param.face_plate_param.Air_condition_Relay == 0x0201)
					{														
						*Data_need_write = 1;
						dis_page_param.face_plate_param.Floor_heating_Relay = ((uint16_t)*data_H) << 8 | ((uint16_t)*data_L) << 0;
						dis_page_param.face_plate_param.Floor_relay_switch &= 0xff00;
						dis_page_param.face_plate_param.Floor_relay_switch |= ( (*data_L) <<8);
					}
					else
					{
						error_code += 1;
					}		
				}				
				else if(*data_L == 0x02)
				{
					if(dis_page_param.face_plate_param.Air_condition_Relay == 0x0000)
					{														
						*Data_need_write = 1;
						dis_page_param.face_plate_param.Floor_heating_Relay = ((uint16_t)*data_H) << 8 | ((uint16_t)*data_L) << 0;
						dis_page_param.face_plate_param.Floor_relay_switch &= 0xff00;
						dis_page_param.face_plate_param.Floor_relay_switch |= ( (*data_L) <<8);
					}
					else
					{
						error_code += 1;
					}		
				}	
				else
				{
					error_code += 1;
				}					
			}			
			else
			{
				error_code += 1;
			}
			break;
		case 18:	
			if(AirFresh_Sheiled_Set())
			{
				return 0;
			}
			if(*data_H == 0x00)
			{
				if(*data_L == 0x00)
				{
					*Data_need_write = 1;
					dis_page_param.face_plate_param.Fresh_air_Relay = 0x0000;
				}
				else if(*data_L == 0x01)
				{
					if(dis_page_param.face_plate_param.Air_condition_Relay == 0x0000)
					{
						*Data_need_write = 1;
						dis_page_param.face_plate_param.Fresh_air_Relay = 0x0001;
					}
					else
					{
						error_code += 1;					
					}
				}
				else
				{
					error_code += 1;				
				}								
			}
			else
			{
				error_code += 1;			
			}
			break;
		case 19:	
			if(*data_H == 0x00)
			{
				if((*data_L <= 0X05) || (*data_L == 0X0F))
				{
					*Data_need_write = 1;
					dis_page_param.face_plate_param.Ltemp_Protection_valve = *data_L;
				}
				else
				{
					error_code += 1;					
				}
			}	
			else
			{
				error_code += 1;			
			}
			break;
		case 20:	
			if(*data_H == 0x00)
			{
				if((*data_L == 0X00) || (*data_L == 0X01))
				{
					*Data_need_write = 1;
					dis_page_param.face_plate_param.Lock_screen = *data_L;
				}
				else
				{
					error_code += 1;					
				}
			}	
			else
			{
				error_code += 1;			
			}					
			break;
		case 21:	
			if(*data_H == 0x00)
			{
				if((*data_L == 0X00) || (*data_L == 0X01))
				{
					*Data_need_write = 1;
					dis_page_param.face_plate_param.Full_Half_Lock = *data_L;
				}
				else
				{
					error_code += 1;					
				}
			}	
			else
			{
				error_code += 1;			
			}					
			break;	
		case 22:	
			if(*data_H == 0x00)
			{
				if((*data_L == 0X00) || (*data_L == 0X01))
				{
					*Data_need_write = 1;
					dis_page_param.face_plate_param.Data_send = *data_L;
				}
				else
				{
					error_code += 1;					
				}
			}	
			else
			{
				error_code += 1;			
			}					
			break;			
		case 23:  
			if(*data_H == 0x00 || *data_H == 0x01)
			{
				if( (*data_L >= 0x01) && (*data_L <= 0x06))
				{
					*Data_need_write = 1;
					dis_page_param.face_plate_param.Led_Brightness = ((uint16_t)*data_H) << 8 | ((uint16_t)*data_L) << 0;					
				}
				else
				{
					error_code += 1;					
				}
			}
			else
			{
				error_code += 1;				
			}
		  break;
		case 25:  
			if(*data_H == 0x00)
			{
				if(*data_L <= 0x05 || *data_L == 0x0f)
				{
					*Data_need_write = 1;
					dis_page_param.face_plate_param.Sleep_time_addr = ((uint16_t)*data_H) << 8 | ((uint16_t)*data_L) << 0;				
				}
				else
				{
					error_code += 1;					
				}
			}
			else
			{
				error_code += 1;				
			}
			break;				
		case 100: 
			{
				u16 baudrate_now = ((uint16_t)*data_H << 8)| ((uint16_t)*data_L <<0);
				const uint16_t baudrate[7] = {0x01e0,0x03c0,0x05a0,0x0780,0x0f00,0x15e0,0x0000};
				uint8_t i = 0;
				for( i = 0; i < 7; i++)
				{
					if(baudrate_now ==  baudrate[i])
					{
						break;
					}			
				}
				if(i == 7)
				{  
					error_code += 1;
				}
				else
				{
					if(baudrate_now != dis_page_param.face_plate_param.Device_BaudRate)
					{
						*Data_need_write = 1;
						dis_page_param.face_plate_param.Device_BaudRate = baudrate_now;
						xTaskNotify((TaskHandle_t	)LEDTask_Handler,
						(uint32_t		)Change_baud,			
						(eNotifyAction	)eSetBits);				
					}
				}
			}
			break;
		case 101 : 
			if(*data_H == 0x00)
			{
				if(*data_L == 0x00)
				{
					*Data_need_write = 1;
					dis_page_param.face_plate_param.TempHumi_UpdateMode = 0x0000;
				}
				else
				{
					error_code += 1;	
				}
			}
			else if(*data_H == 0x01 ||*data_H == 0x02 || *data_H == 0x03 )
			{
				if(*data_L >= 0x01 && *data_L <= 0x0C )
				{
					*Data_need_write = 1;
					dis_page_param.face_plate_param.TempHumi_UpdateMode = ((uint16_t)*data_H) << 8 | ((uint16_t)*data_L) << 0;
				}
				else
				{
					error_code += 1;			
				}				
			}
			else
			{
				error_code += 1;			
			}
			break;
		case 102: 
			if(*data_H == 0x00)
			{
				if(*data_L == 0x00 || *data_L == 0x01)
				{
					*Data_need_write = 1;
					dis_page_param.face_plate_param.Open_device_mode = ((uint16_t)*data_H) << 8 | ((uint16_t)*data_L) << 0;
				}
				else
				{
					error_code += 1;			
				}				
			}
			else
			{
				error_code += 1;			
			}
			break;
		case 109:
			if(*data_H == 0x00)
			{
				if(*data_L == 0x00 || *data_L == 0x01)
				{
					*Data_need_write = 1;
					dis_page_param.face_plate_param.Parm_SaveFlag = ((uint16_t)*data_H) << 8 | ((uint16_t)*data_L) << 0;
				}
				else
				{
					error_code += 1;			
				}				
			}
			else
			{
				error_code += 1;			
			}
			break;
		case 110:
			if(*data_H == 0x00)
			{
				if(*data_L <= 0x07 && (*data_L) != 0)
				{
					*Data_need_write = 1;
					dis_page_param.face_plate_param.Panel_Shield = ((uint16_t)*data_H) << 8 | ((uint16_t)*data_L) << 0;
					if(AirCondition_Sheiled == 0)
					{
						dis_page_param.face_plate_param.Air_condition_switch = 0;
						dis_page_num.Dis_air_Conditioning = dis_air_Conditioning_close;
					}
					if(FloorHeating_Sheiled == 0)
					{
						dis_page_param.face_plate_param.Floor_heating_switch = 0;
						dis_page_num.Dis_floor_heating = dis_floor_heating_close;
					}
					if(AirFresh_Sheiled == 0)
					{
						dis_page_param.face_plate_param.Fresh_air_switch = 0;
						dis_page_num.Dis_fresh_air = dis_fresh_air_close;
					}		
					display_page_t	*page;
					if(dis_page_num.display_page == dis_advanced_set || dis_page_num.display_page == dis_message_read)
					{
						page = &dis_page_param.Last_device_page_num;
					}	
					else
					{
						page = &dis_page_num.display_page;
					}					
					if((*page) == dis_air_Conditioning)
					{
						if(AirCondition_Sheiled == 0)
						{
							if(FloorHeating_Sheiled == 0)
							{
								(*page) = dis_fresh_air;
							}
							else
							{
								(*page) = dis_floor_heating;
							}
						}					
					}
					if((*page) == dis_floor_heating)
					{
						if(FloorHeating_Sheiled == 0)
						{
							if(AirCondition_Sheiled == 0)
							{
								(*page) = dis_fresh_air;
							}
							else
							{
								(*page) = dis_air_Conditioning;
							}
						}					
					}							
					if((*page) == dis_fresh_air)
					{
						if(AirFresh_Sheiled == 0)
						{
							if(AirCondition_Sheiled == 0)
							{
								(*page) = dis_floor_heating;
							}
							else
							{
								(*page) = dis_air_Conditioning;
							}
						}					
					}	
				}
				else
				{
					error_code += 1;			
				}				
			}
			else
			{
				error_code += 1;			
			}
			break;
		case 111:
			if(*data_H == 0x00)
			{
				if( (*data_L >= 10) && (*data_L <= 32) )
				{
					if(*data_L > dis_page_param.face_plate_param.LTemp_Limit)
					{
						dis_page_param.face_plate_param.HTemp_Limit	= 	*data_L;
						*Data_need_write = 1;
					}
					else
					{
						error_code += 1;	
					}
				}
				else
				{
					error_code += 1;	
				}
			}
			else
			{
				error_code += 1;	
			}
			break;
		case 112:
			if(*data_H == 0x00)
			{
				if( (*data_L >= 10) && (*data_L <= 32) )
				{
					if(*data_L < dis_page_param.face_plate_param.HTemp_Limit)
					{
						dis_page_param.face_plate_param.LTemp_Limit	= *data_L;
						*Data_need_write = 1;
					}
					else
					{
						error_code += 1;	
					}
				}
				else
				{
					error_code += 1;	
				}
			}
			else
			{
				error_code += 1;	
			}
			break;	
		case 0:
			if(*data_H == 0x00)
			{
				if(*data_L == 0x01)
				{
					MemData_Reset();
					dis_page_param.face_plate_param.Reset_Flag = 1;
					Reset_CNT = 3;
				}
				else if(*data_L == 0x00)
				{
					dis_page_param.face_plate_param.Reset_Flag = 0;
					Reset_CNT = 0;							
				}
				else
				{
					error_code += 1;			
				}				
			}
			else
			{
				error_code += 1;			
			}
			break;			
		default:
		  break;
	  }	
	if(error_code != 0)
	{
		return 0;
	}
	else
	{
		return 1;
	}
}
void eMBFuncWriteHoldingRegister(UART_msg *ptrmsg)
{
	uint16_t addr = (uint16_t)(ptrmsg->data[2] <<8) + (uint16_t)(ptrmsg->data[3]);
	u8 Data_need_write = 0;	
	if(eMBFuncWriteHoldingRegister_do(&ptrmsg->data[4],&ptrmsg->data[5],addr,&Data_need_write) == 0)
	{
		ptrmsg->data[1] |= 0x80;
	}
	u16 CRCA;
    u8  CRCH;
    u8  CRCL;
    CRCA = GetCRC16(ptrmsg->data,ptrmsg->len-2);
    CRCH = CRCA>>8;
    CRCL = (u8)CRCA;
	ptrmsg->data[ptrmsg->len-2] = CRCH;
	ptrmsg->data[ptrmsg->len-1] = CRCL;	
  if(Data_need_write >= 1)
  { 
	xTaskNotify((TaskHandle_t	)LEDTask_Handler,
			(uint32_t		)Need_Write,			
			(eNotifyAction	)eSetBits);				
  }	
  	xTaskNotify((TaskHandle_t	)LEDTask_Handler,
			(uint32_t		)Wake_up,			
			(eNotifyAction	)eSetBits);				
}
void eMBFuncWriteMultipleHoldingRegister(UART_msg *ptrmsg)
{
	uint16_t addr = (uint16_t)(ptrmsg->data[2] <<8) + (uint16_t)(ptrmsg->data[3]);
	if(addr > 0xff) return;
	uint16_t num = (uint16_t)(ptrmsg->data[5]) + (uint16_t)(ptrmsg->data[4] << 8);
	if(num > 255 || 2 *num != ptrmsg->data[6] ) return ;
	u8 Data_need_write = 0;	
	for(uint8_t i = 0;i < num;i++)
	{
		addr = (uint16_t)(ptrmsg->data[2] <<8) + (uint16_t)(ptrmsg->data[3]) + i;
		if(eMBFuncWriteHoldingRegister_do(&ptrmsg->data[7 + 2*i],&ptrmsg->data[8 + 2*i],addr,&Data_need_write) == 0)
		{
			ptrmsg->data[1] |= 0x80;
		}
	}		
	u16 CRCA;
	u8  CRCH;
	u8  CRCL;
	CRCA = GetCRC16(ptrmsg->data,ptrmsg->len-2);
	CRCH = CRCA>>8;
	CRCL = (u8)CRCA;
	ptrmsg->data[ptrmsg->len-2] = CRCH;
	ptrmsg->data[ptrmsg->len-1] = CRCL;		
	if(Data_need_write >= 1)
	{ 
		xTaskNotify((TaskHandle_t)LEDTask_Handler,			
								(uint32_t)Need_Write,		
								(eNotifyAction)eSetBits);	
	}		
  	xTaskNotify((TaskHandle_t)LEDTask_Handler,				
								(uint32_t)Wake_up,			
								(eNotifyAction)eSetBits);	
}
void mb_rtu_task(void *pvParameters)
{
	UART_msg ptrmsg;
    while(1)
    {
		//vTaskDelay(20);
        xQueueReceive(MB_RTU_Rx_Queue,&ptrmsg,portMAX_DELAY);
		//for(int i=0;i<ptrmsg.len;i++)
		//printf("///0x%x  %d///",ptrmsg.data[i],ptrmsg.len);
		if(!Slave_Addr_check(ptrmsg.data[0]))
        continue;
		if(!CRC_Check(ptrmsg.data,ptrmsg.len))
		continue;		
		zigbee_cmd.Is_From_485=1;
		switch(ptrmsg.data[1])
		{
			case 3:					
				eMBFuncReadHoldingRegister(&ptrmsg);
				xQueueSend(MB_RTU_Tx_Queue,&ptrmsg,0);
				break;
			case 6:
				eMBFuncWriteHoldingRegister(&ptrmsg);
				PullOutOf_SleepPage();
				xQueueSend(MB_RTU_Tx_Queue,&ptrmsg,0);
				break;
			case 0x10:
				eMBFuncWriteMultipleHoldingRegister(&ptrmsg);
				PullOutOf_SleepPage();
				xQueueSend(MB_RTU_Tx_Queue,&ptrmsg,0);
				break;
			default:
				break;				
		}	
       all_data_update();	
			//vTaskDelay(20);
    }
}