/** * @file system.h * @brief declaration of fuction in system.c and define maroc which is used in system.c * @author qinlang * @date 2022.05.06 * @par email: * @par email:qinlang.chen@tuya.com * @copyright HANGZHOU TUYA INFORMATION TECHNOLOGY CO.,LTD * @par company * http://www.tuya.com */ #include "protocol.h" #ifndef __SYSTEM_H_ #define __SYSTEM_H_ #ifdef SYSTEM_GLOBAL #define SYSTEM_EXTERN #else #define SYSTEM_EXTERN extern #endif #ifdef SUPPORT_MCU_RTC_CHECK typedef struct { unsigned char hour; unsigned char min; unsigned char sec; unsigned short w_year; unsigned char w_month; unsigned char w_date; }_calendar_obj; #endif #ifdef SUPPORT_MCU_OTA #define FW_SINGLE_PACKET_SIZE 0x20 ///< firmware single packet size, define by mcu SYSTEM_EXTERN unsigned char current_mcu_pid[8]; ///< current mcu pid /** ota mcu firmware struct*/ typedef struct { unsigned char mcu_ota_pid[8]; //OTA fw PID unsigned char mcu_ota_ver; //OTA fw version unsigned int mcu_ota_fw_size; //OTA fw size unsigned int mcu_current_offset; //current offset unsigned int mcu_ota_checksum; //OTA fw checksum }_ota_mcu_fw; SYSTEM_EXTERN _ota_mcu_fw ota_fw_info; ///< ota firmware infomation #endif #ifdef SET_ZIGBEE_NWK_PARAMETER typedef struct { unsigned short heart_period; unsigned short join_nwk_time; unsigned short rejion_period; unsigned short poll_period; unsigned short fast_poll_period; unsigned char poll_failure_times; unsigned char rejoin_try_times; unsigned char app_trigger_rejoin; unsigned char rf_send_power; }nwk_parameter_t #endif ///< Byte order of frames #define HEAD_FIRST 0 #define HEAD_SECOND 1 #define PROTOCOL_VERSION 2 #define SEQ_HIGH 3 #define SEQ_LOW 4 #define FRAME_TYPE 5 #define LENGTH_HIGH 6 #define LENGTH_LOW 7 #define DATA_START 8 ///< define cmd of frame #define ZIGBEE_FACTORY_NEW_CMD 0 #define PRODUCT_INFO_CMD 1 //pid information #define ZIGBEE_STATE_CMD 2 //zigbee module send network state to mcu #define ZIGBEE_CFG_CMD 3 //mcu config zigbee state #define ZIGBEE_DATA_REQ_CMD 4 //zigbee module shend DP data to mcu #define DATA_DATA_RES_CMD 5 //mcu response zigbee DP send #define DATA_REPORT_CMD 6 //mcu report DP data to zigbee #define ZIGBEE_RF_TEST_CMD 8 #define QUERY_KEY_INFO_CMD 9 #define CALL_SCENE_CMD 10 #define MCU_OTA_VERSION_CMD 0x0B //zigbee request mcu version #define MCU_OTA_NOTIFY_CMD 0x0C //mcu ota notify #define MCU_OTA_DATA_REQUEST_CMD 0x0D //MCU OTA data request #define MCU_OTA_RESULT_CMD 0x0E //MCU OTA result report #define CHECK_ZIGBEE_NETWORK_CMD 0x20 #define TIME_GET_CMD 0x24 #define CHECK_MCU_TYPE_CMD 0x25 #define SET_ZIGBEE_NEK_PARAMETER_CMD 0x26 #define SEND_BROADCAST_DATA_CMD 0x27 #define READ_MCU_DP_DATA_CMD 0x28 #define SEND_BEACON_NOTIFY_CMD 0x29 ///< frme data define #define SERIAL_PROTOCOL_VER 0x02 // the version of frame #define PROTOCOL_HEAD 0x09 //the lcation of frame length except for tail #define FIRST_FRAME_HEAD 0x55 // first byte of frame #define SECOND_FRAME_HEAD 0xaa // second byte of frame ///< define communication state #define ZIGBEE_NOT_JION 0x00 //zigbee module not jion network #define ZIGBEE_JOIN_GATEWAY 0x01 //zigbee module had jioned network #define ZIGBEE_JOIN_ERROR 0x02 //zigbee module network state error #define ZIGBEE_JOINING 0x03 //zigbee module jioning #define REPORT_DATA_SUCESS 0x10 //translate sucess #define REPORT_DATA_FAILURE 0x20 //translate failure #define REPORT_DATA_TIMEOUT 0x40 //translate timeout #define REPORT_DATA_BUSY 0x80 //translate busy #define RESET_ZIGBEE_OK 0x00 //rest zigbee success #define RESET_ZIGBEE_ERROR 0x01 //reset zigbee error SYSTEM_EXTERN volatile unsigned char zigbee_queue_buf[PROTOCOL_HEAD + ZIGBEE_UART_QUEUE_LMT]; ///< serial received queue SYSTEM_EXTERN volatile unsigned char zigbee_uart_rx_buf[PROTOCOL_HEAD + ZIGBEE_UART_RECV_BUF_LMT]; ///< serial received buf SYSTEM_EXTERN volatile unsigned char zigbee_uart_tx_buf[PROTOCOL_HEAD + ZIGBEE_UART_SEND_BUF_LMT]; ///< serial translate buf SYSTEM_EXTERN volatile unsigned char *queue_in; SYSTEM_EXTERN volatile unsigned char *queue_out; SYSTEM_EXTERN volatile unsigned char zigbee_work_state; ///< the state of zigbee module working SYSTEM_EXTERN volatile unsigned char rx_in; ///< recieved a complete frame of data flag SYSTEM_EXTERN volatile unsigned char wakeup_flag; ///< initiative wakeup flag SYSTEM_EXTERN unsigned char record_report_time_flag; ///< 0x00：using gateway time；0x01：using mcu local time SYSTEM_EXTERN unsigned char timestamp[4]; #ifdef SUPPORT_MCU_RTC_CHECK SYSTEM_EXTERN _calendar_obj _time; #endif /** * @brief padding a byte in send buf base on dest * @param[in] {dest} the location of padding byte * @param[in] {byte} padding byte * @return sum of frame after this operation */ unsigned short set_zigbee_uart_byte(unsigned short dest, unsigned char byte); /** * @brief padding buf in send buf base on dest * @param[in] {dest} the location of padding * @param[in] {src} the head address of padding buf * @param[in] {len} the length of padding buf * @return sum of frame after this operation */ unsigned short set_zigbee_uart_buffer(unsigned short dest, unsigned char *src, unsigned short len); /** * @brief send len bytes data * @param[in] {in} the head address of send data * @param[in] {len} the length of send data * @return void */ void zigbee_uart_write_data(unsigned char *in, unsigned short len); /** * @brief calculate the sum of the array * @param[in] {pack} the head address of array * @param[in] {pack_len} the length of array * @return sum */ unsigned char get_check_sum(unsigned char *pack, unsigned short pack_len); /** * @brief send a frame data * @param[in] {fr_cmd} frame cmd id * @param[in] {len} len of frame data * @return void */ void zigbee_uart_write_frame(unsigned char fr_cmd, unsigned short len); /** * @brief handle received frame from zigbee module baseon frame cmd id * @param[in] {void} * @return result of handle */ int data_handle(unsigned short offset); /** * @brief mcu send a cmd which used to making zigbee module leave network * @param[in] {void} * @return void */ void mcu_exit_zigbee(void); /** * @brief mcu send a cmd which used to making zigbee module restart jion network * @param[in] {void} * @return void */ void mcu_join_zigbee(void); /** * @brief mcu send a cmd which used to getting zigbee network state * @param[in] {void} * @return void */ void mcu_get_zigbee_state(void); #ifdef SUPPORT_MCU_RTC_CHECK /** * @brief mcu send a cmd which used to getting timestamp * @param[in] {void} * @return void */ void mcu_get_system_time(void); /** * @brief calculta time from frame * @param[in] {void} * @return void */ void zigbee_timestamp_to_time(void); #endif #ifdef SET_ZIGBEE_NWK_PARAMETER /** * @brief mcu can set zigbee nwk parameter * @param[in] {parameter_t *} * @param * @return void */ void mcu_set_zigbee_nwk_parameter(nwk_parameter_t *Pparameter); #endif #ifdef BROADCAST_DATA_SEND /** * @brief mcu can send a broadcast data in zigbee network * @param[in] {buf} array of buf which to be sended * @param[in] {buf_len} send buf length * @return void */ void mcu_send_broadcast_data(unsigned char buf[], unsigned char buf_len); #endif /** * @brief mcu version string to char * @param[in] {void} * @return result of version */ unsigned char get_current_mcu_fw_ver(void); #ifdef SUPPORT_MCU_OTA /** * @brief mcu ota offset requset * @param[in] {packet_offset} packet offset * @return viod */ void mcu_ota_fw_request(void); /** * @brief mcu ota result report * @param[in] {status} result of mcu ota * @return void */ void mcu_ota_result_report(unsigned char status); /** * @brief get mcu pid data dan saved in current_mcu_pid * @param[in] {void} * @return result of handle */ void current_mcu_fw_pid(void); #endif /** * @brief compare str1 and str2 * @param[in] {str1} str1 * @param[in] {str2} str2 * @param[in] {len} len * @return equal return 0 else return -1 */ int strcmp_barry(unsigned char *str1,unsigned char *str2,unsigned char len); /** * @brief translate assic to hex * @param[in] {assic_num} assic number * @return hex data */ char assic_to_hex(unsigned char assic_num); #ifdef __cplusplus } #endif #endif